We are seeking a Precision Measurement Technician to join our federal team at our York, PA location in support of Navy Systems. Qualify in and perform the following non-destructive examination, procedure: dye penetrant tests and magnetic particle test.  Quality in and perform setups, programming and operation of the coordinate measuring machine.  Adjust, calibrate, certify and date instruments.  Check, audit, measure, record, repair and calibrate precision gauges, measuring devices, including inspection of any special parts, jigs, fixtures, dies, assemblies and tools.  Investigate a wide variety of assignments, such as tooling, fixtures, production operations, government coded and regulated packaging and shipping operations, instrument calibration and repair and receiving operations.

We're keeping the Navy cool. Literally. Our team at the York (Grantley) Plant custom designs, develops and manufactures complex chilled water HVAC and refrigeration equipment for Navy vessels around the world. The job consists of performing duties required to plan, lay out, fabricate, assemble, fit, braze tubing, thread, weld complex piping, system components and weld coded, and noncoded pressure vessel assemblies and subassemblies, working with ferrous, nonferrous metals, using conventional or automatic submerged arc welding and difficult positions of stick, tig, and manual arc welding of Navy equipment.

At Johnson Controls, we support our nation’s most critical facilities, the people who occupy them, and the missions they enable. Johnson Controls Federal Systems (JCFS) is a specialized team serving as a trusted partner to the federal government. We help modernize U.S. military installations, Department of Defense and other federal agency facilities to be smarter, more resilient, efficient, sustainable, and secure.

Location: York, PA
Shift: 1st 
Benefits: Eligible for benefits on first day of employment
* Relocation assistance may be available.  Certain conditions apply.
Pay: $30.12 per hour
Bonus: Eligible
Union: This is a bargaining unit (Union) position.

Learn more about Navy Systems York, PA Plant:   Navy Systems, York PA

As a Precision Measurement Technician, you will:

• Qualify in and perform the following non-destructive examination, procedure: dye penetrant tests and magnetic particle test. 
• Quality in and perform setups, programming and operation of the coordinate measuring machine.  Adjust, calibrate, certify and date instruments. 
• Check, audit, measure, record, repair and calibrate precision gauges, measuring devices, including inspection of any special parts, jigs, fixtures, dies, assemblies and tools. 
• Investigate a wide variety of assignments, such as tooling, fixtures, production operations, government coded and regulated packaging and shipping operations, instrument calibration and repair and receiving operations.
• Audit and verify by performing checks and tests as necessary on startup procedures, detect malfunctions, oil filter and oil levels.
• Communicate back to the party being audited, the findings of the audit.  Proving out of new and proved operations.
• Make surface plate, and optical comparator setups and hardness tests.
• Use related precision measuring tooling, gauges, test equipment, and appropriate material handling equipment.
• Maintain surveillance over machines, audit the checking of parts for machining and other related operations.
• Make audit checks of castings, gears, cleanliness, dryness, hardness and appearance.
• Follow non-confirming material procedure, make recommendations, and calculations.
• Maintain records, prepare purchase order requisitions for approval by supervision.  Identify key characteristics that require operator verification.
• Generate documents to be used by operators to verify/assist improvements (example total quality check sheet).
• Develop continuous improvement efforts by guiding cross-functional problem-solving teams and by implementing, training and auditing statistical process control (SPC).

Required Qualifications:

• Investigate assignments such as tooling, fixtures, production operations, repair, receiving operations, parts of units in various stages of assembly to insure requirements, and a make nondestructive test.
• Considerable judgment to setup sequence of nondestructive test limitations, to plan, perform unusual and difficult work where only general operation methods are available.
• Moderate physical effort working continuously with light weight, or frequently with average weight materials while repairing, gauging, inspecting, auditing parts assemblies and tooling.
• Concentrated mental, visual attention required where work is to make dimensional checks, surface plate, optical comparator setups and visual attention when inspecting complex work with very close limits of high accuracy and quality.
• Analytical ability relative to Statistical Process Control (SPC).
• Normal safety precautions necessary to prevent injury to others, accidents should they occur would be lost time in nature.
• Good working conditions with exposure to shop noises, fumes, dirt but not to the extent of being objectionable.
• Exposure to lost time accidents where injuries would be severe, such as hand, foot, ear, eye injury when in the vicinity of material handling operations.
• Use shop mathematics.  Work from prints, tables, charts, codes, regulations and specifications.  Use a variety of precision measuring devices.

Preferred Qualifications:

• Over 3 - 4 years of industry (Manufacturing) experience.

Preferred Education:

• Knowledge of shop practices, machine operation, assembly methods and inspection methods and procedures.
• Equivalent to training received in a formal registered apprenticeship program.

Who We Are

At Johnson Controls (NYSE:JCI), we are One Team working collaboratively to create purposeful solutions that make a difference in the world. We are a Fortune 500 company with more than 100,000 employees worldwide offering the world`s largest portfolio of building technology products, solutions and services. As a member of our Federal Systems team, your work matters. We value and recognize your contributions and want to help you succeed. We invest in our employees, provide opportunities for growth and advancement, and foster a culture of inclusion and respect.

To learn more about who we are and what we do, please check out our Take a Journey video.  

Recently, Johnson Controls has been recognized by several organizations for leadership in Environment, Sustainability and Governance, as well as innovations in smart building platforms:

• ·         Named to FORTUNE’s “Most Admired Companies” List
• ·         Corporate Knights Global 100 Most Sustainable Corporations in the World
• ·         Identified as a Sustainalytics Top-Rated ESG Performer for managing material ESG issues
• ·         Received HRH The Prince of Wales’ inaugural Terra Carta Seal
• ·         Ranked 67 on the Drucker Institute’s list of best-managed companies in America
• ·         Named Chairman and CEO George Oliver IoT CEO of the Year for 2022

Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers

Division: JCFS (Johnson Controls Federal Systems)

#LI-JW2
#LI-Onsite